苏州天剑电子有限公司
控制精度0.5

产品中心

联系方式

苏州天剑电子有限公司
地 址:苏州市吴中经济开发区
电 话:0512-65852742   
            0512-65852749
Q Q1:609434585
Q Q2:1239028967
邮 编:215128
email:wellssr@live.com
网 址:www.wellssr.com
天剑官方微信公众号sztjdz
欢迎加入微信扫描二维码
关注公众号有更多惊喜!

 

当前位置: 网站首页 > 产品中心 > ◆温/湿度控制器(触控) > J-THERMO( HANYOUNG )
J-THERMO( HANYOUNG )

TD300双通道可编程程序温度控制器

TD300双通道可编程程序温度控制器
  • 型号 : TD300
  • 品牌 :
  • 价格 :
TD300- 采用 TFT LCD触摸屏
 - 2信道控制
 - 最多100模式, 100段 / 模式(总2,400段)
 - PID 控制 
- 多种警报功能 (输出:4点,动作:20种) 
- 触点输出(DI) 8点, 数码输出(DO) 8点
 - 通信功能(RS485 或者 RS232. 以刑名构成) 
- 通过SD卡保存数据及参数备份

详细描述


  • TD300

  • - 采用 TFT LCD触摸屏

    - 2信道控制

    - 最多100模式, 100段 / 模式(总2,400段)

    - PID 控制
    
- 多种警报功能 (输出:4点,动作:20种)
    
- 触点输出(DI) 8点, 数码输出(DO) 8点

    - 通信功能(RS485 或者 RS232. 以刑名构成)
    
- 通过SD卡保存数据及参数备份


型号选择

MODELCODEDESCRIPTION
TD300-0512-658527420512-658527422 CHANNLE PROGRAMMABLE TEMPERATURE CONTROLLER 96(W)×96(H)×100(D)
Communication1
RS485/422
2
RS232C
language1Korean / English (Standard)
2English / Chinese (Simplified)

额定

[ Input Specification ]
Input
(2 channels)
Pt100
(IEC751)
-200.0 ~ 640.0 ℃, ± 0.1 % of F.S
TC_K-200.0 ~ 1370.0 ℃, ± 0.1 % of F.S
TC_J-200.0 ~ 1200.0 ℃, ± 0.1 % of F.S
TC_E-200.0 ~ 1000.0 ℃, ± 0.1 % of F.S
TC_T-200.0 ~ 400.0 ℃, ± 0.1 % of F.S
TC_R0 ~ 1700.0 ℃, ± 0.1 % of F.S
TC_S0 ~ 1700.0 ℃, ± 0.1 % of F.S
mV0 ~ 100 mV 또는 -10 ~ 20 mV (-999.9 ~ 9999.9), ± 0.1 % of F.S
V DC0 - 10 V (Signal Input Range setup is available, -999.9 ~ 9999.9), ±0.1 % of FS
4 - 20 mAUse 250 Ω external resistance, V DC Use after setup of V DC 1 - 5 V
Input Resolution24 bit
Accuracy of indication0.1 %
Sampling cycle500 msec
Input ResistanceMore than 1 ㏁
Maximum allowable resistance of lineLess than 50 Ω / Line (Resistance of lines is a same condition)
RJC±1.5 ℃

[ Output Specification ]
Control
Output
(2 channels)
SCR4 - 20 mA DC(Resistive load : less than 600 Ω)
Output Resolution : 16 bit
Accuracy of Output : ±0.1 % of FS
Output Ripple : 0.2 % of FS
SSR24 V DC Pulse (Resistive load : More than 600Ω)
Min. Pulse Range : 10 ms
Cycle Time : Available to select 1 - 1000 s
Relay OutputKind of Internal Relay : N/O -> 250 V AC 5 A / 30 V DC 5 A
Transmission Output
(4 - 20 mA)

Avaliable to select PV/SV/H.MV/C.MV of each channel
Output Accuracy : ±0.1 % of FS
In case of heating/cooling control, if control output of heating is SCR or SSR, this channel can not use transmission output.

Transmission Output Period of outputrenewalEach channel 500 ms

[ Functions ]
Screen3.5” TFT-LCD 및 터치 패널을 통한 인터페이스
PatternMax 100 , Available to operate each channel's pattern
SegmentMax 2,400 ( Max 100 per segment)
Waiting ModeSetup per pattern and setup of using or not using per segment
Repetition & ConnectionAvailable to use Pattern Repetition and Section Repeat Loof Setup (Max. 20) Free connecting operation among patterns is available
PID GroupEach channel 4 Zones, Selectable between manual or automatic
Control MethodHeating control or Heating/Cooling control in each channel. PID or ON/OFF control
Auto TuningOptimal PID GAIN is automatically calculated according to Set Value.
It could be operated by each channel
Proportional Band0.0 ~ 1000.0 ℃ ( If "0" = On/Off control, Not "0" = PID control)
Integral Time0 ~ 6000 sec ( "0" = No Integral Calculation)
Differential Time0 ~ 6000 sec ( "0" = No Differential Calculation)
ON/OFF controlAvailable to select Dead zone 0.1 ~ 1000.0 ℃
Event LogMax 40 Event Logs could be saved depend on various situations
LCD protectionBack light will be off according to designated time of not using touch panel
PasswordPassword is available to prevent other people from changing system setup
Protection of Over-Integral and DifferentialARW Zone setup ( 50 ~ 200 % of proportional band)
Fuzzy FunctionControl overshoot
RAMPAvailable to select SV changing ratio in case of fixing operation
Restrict MV
changing ratio
Function to control sudden change of MV
Alarm Setup4 points, High, Low, Deviation etc. 20 kinds
Inner Signal8 points, object, range and delayed time setup are available
Time Signal8 points when program mode operation
Graph FunctionPV, SV of each channel could be display by graph
Fixing Operation HourAvailable to set fixing operation hour up
Reservation
Operation Fuction
Available to use reservation operation time by using built in timer.
User Logo DisplayUser logo could be shown for 3 sec after power on. Download through communication port
Screen CaptureUpload is available through communication port
LanguageKorean and English (Or Chinese / English optional)
Contact InputRUN/STOP, STEP, HOLD and Error Input
(Stop operation, Delayed/ setup is available)
Contact OutputOutput of various signals
Storage in Power FailureVarious setting and operation information memory
정전복귀STOP / COLD / HOT return when power failure is restored

[ Communication ]
Applied StandardEIA-RS232C, EIA-RS422/485, USB
Max.Connection NumberRS2321 : 1
RS422 / 4851 : 256
Communication MethodRS232Full Duplex
RS422 / 4854 wired Half Duple, 2 wired Half Duplex
Synchronous MethodRS232
RS422 / 485
asynchronous
Communication DistanceRS232Within approximately 10 m
RS422 / 485Within approximately 1.2 Km
Communication SpeedRS232
RS422 / 485
2400 ~ 115200 bps
Length of DataRS232
RS422 / 485
PCLINK : 8 bit / Modbus-ASCII : 7 bit
Parity BitRS232
RS422 / 485
PCLINK : NONE / Modbus-ASCII : EVEN
Stop BitRS232
RS422 / 485
1 bit
Communication ProtocolRS232
RS422 / 485
PCLINK, Modbus-ASCII
Delayed Response TimeRS232
RS422/485
1 + (0 ~ 250) ㎳

[ Ratings ]
Rated Voltage100 - 240 V AC, Valiable Voltage Ratio : ±10 %
Frequecy50 - 60 Hz
Power ConsumptionMax. 10 W
Insulation resistanceBetween 1st & 2nd Terminal
1st/2nd and Earth Terminal
More than 20 ㏁ /500 V DC
Dielectric strengthBetween 1st & 2nd Terminal
1st/2nd and Earth Terminal
2500 V ac, 50 / 60 Hz, 1 분간
Power output24 V d.c, 1A Max. (TD500 only)

[Operation Environment]
InstallationContinuous VibrationVibration Wide : Bleow 1.2 mm (5 - 14 Hz)
Below 4.9 ㎧ (4 - 150 Hz)
Short time VibrationBelow 14.7 ㎧ 15 sec(Each 3 directions)
ShockBelow 147 ㎧ 11 msec
(Each 6 directions, 3 times)
Normal Operation
Condition
Surrounding Temperature0 ~ 50 ℃
Surrounding Humidity20 ~ 90 % RH (No Condensation)
Magnetic EffectLess than 400 AT/m
PreheatingMore than 10 minute
Effectof
surrounding
temperature
Voltage/TC Input± 1 uV / ℃ 또는 ± 0.01 % of F.S / ℃
RTD InputLess than ±0.05 ℃ / ℃
Analog OutputLess than ±0.05 % of FS / ℃

[Condition of Transport and Storage]
Temperature-25 ~ 70 ℃
Humidity5 ~ 95 % RH (No condensation)
ShockLess than 1 m when dropping the packed product

 

点击次数:  更新时间:2018-10-23  【打印此页】  【关闭